Kazakhstan convenient reverse osmosis water filtration system of stainless steel from China manufacturer W1

Activated carbon filter is a process of intercepting suspended particles in water. The suspended suspended matter is filled in the voids between activated carbons. The pore size and porosity of the filter layer increase with the increase of the particle size of the activated carbon filter. , The larger the pores of the activated carbon filter layer, the more suspended solids can be intercepted, so that the middle and lower layer filter layer can better play the role of interception and increase the interception capacity of the unit.

Dosing devices include the addition of oxidants, reducing agents, flocculants, scale inhibitors, and fungicides, etc.

Flocculant is more powerful to remove impurities in raw water. Sterilization is to kill bacteria in raw water. The addition of scale inhibitor is to increase the ultimate carbonate hardness, prevent scaling, oxidation, and reducing agent. The addition of is based on the difference in the quality of the raw water,

In short, there are many kinds of dosing devices. According to the different quality of raw water, they can be combined and matched at will. They can be added before carbon filter and sand filter, after carbon filter and sand filter, and can also be added in the first stage reverse osmosis. Before, in short, the purpose of the dosing device was to select a suitable dosing device according to the water quality of the raw water, and after physical and chemical adjustments, the raw water quality can meet the requirements of entering the first-level reverse osmosis.

This system is mainly used in the pretreatment part of raw water, with the use of primary reverse osmosis, secondary reverse osmosis, ultrafiltration, and EDI to meet different water requirements and meet different use requirements.